Particle emission from laser printers with different printing speeds

Title
Particle emission from laser printers with different printing speeds
Author(s)
변정훈김장우[김장우]
Issue Date
201207
Publisher
PERGAMON-ELSEVIER SCIENCE LTD
Citation
ATMOSPHERIC ENVIRONMENT, v.54, pp.272 - 276
Abstract
The present work investigated particle emissions for 10 min operating time for commercial color laser printers having different printing speeds (5, 24,38 prints per minute (ppm)) in an experimental chamber (5 m(3)) under 1 h(-1) of air exchange rate. Number and mass concentrations of the emission particles were measured, and a correlation between emission and printing speed is discussed. The average mobility equivalent particle diameter (50-244 nm) of the emission was proportional to the printing speed (5-38 ppm) but the average particle number concentration (5.3-1.2 x 10(4) particles cm(-3)) was inversely proportional to the speed. From morphology analyses of the particles, it could be estimated that the number decrease (or diameter increase) rates of the primary particles due to coagulation were 3.25 (0.17), 3.40 (0.44), and 9.31 x 10(3) (0.96) particles cm(-3) s(-1) (nm s(-1)) for 5, 24, and 38 ppm, respectively. Corresponding particle mass emission rates (or mass emission per print) were 0.007 (0.23), 0.039 (0.27), and 0.449 (1.97) mg h(-1) (x 10(-4) mg print(-1)) for 5, 24, and 38 ppm, respectively. (C) 2012 Elsevier Ltd. All rights reserved.
URI
http://hdl.handle.net/YU.REPOSITORY/27638http://dx.doi.org/10.1016/j.atmosenv.2012.02.002
ISSN
1352-2310
Appears in Collections:
공과대학 > 기계공학부 > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE