Full metadata record
|dc.identifier.citation||한국폐기물자원순환학회지, v.29, no.7, pp.662 - 672||-|
|dc.description.abstract||Electrochemical reductive extraction of copper from LCD manufacturing process and through hole plating process for PCB circuit board wastewater was experimented using synthetic wastewater. Copper plate which could be used as raw material through melting with extracted copper from wastewater and graphite plate were used as a cathode and an anode,respectively. The copper extraction could be optimized in pH 2 and polar space of 45mm. The extraction rate of copper per unit energy was decreased as HRT increased and initial copper concentration decreased. As the optimal HRTs which could maximize the productivity for copper on energy, 80 ~ 110 min at 50 mg/L, 64 min at 1,000 mg/L and 77 ~ 98 min at 3,000 mg/L were determined, respectively.||-|
|dc.title||전기적 환원공정을 이용한 정보산업 폐수로부터의 구리회수 최적조건에 관한 연구||-|
|dc.title.alternative||Optimal Conditions for Copper Recovery from IT Wastewater Using Electrochemical Reduction||-|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.