Effect of Sintering Temperature on the Microstrutcure and Magnetic Properties of Fe-6.5%Si Alloy Fabricated by Metal Injection Molding

Title
Effect of Sintering Temperature on the Microstrutcure and Magnetic Properties of Fe-6.5%Si Alloy Fabricated by Metal Injection Molding
Author(s)
최대엽후세인시아리프신동혁[신동혁]고영건
Keywords
GRAIN-SIZE; DIFFUSION; BEHAVIOR; STEEL; MICROSTRUCTURE; MECHANISMS
Issue Date
201302
Publisher
KOREAN INST METALS MATERIALS
Citation
KOREAN JOURNAL OF METALS AND MATERIALS, v.51, no.2, pp.105 - 111
Abstract
The present work demonstrated the influence of sintering temperature on the microstructure and magnetic properties of Fe-6.5%Si alloys fabricated via metal injection molding. The samples were sintered in an Ar atmosphere at three different temperatures, 1100, 1200, and 1300 degrees C. Microstructural observations of the sintered sample revealed that, with increasing sintering temperature, the average grain size of the ferrite phase increased, while the fraction of the micro pore decreased. These results were attributed to the increasing mobility of the grain boundaries. The hysteresis curves showed that the magnetic properties of the sintered samples as a soft magnet were enhanced with increasing sintering temperature since the saturation magnetization increased and the coercivity decreased, reaching the values of 1.22 tesla and 1.84 kA/m at 1300 degrees C. Moreover, the values of the magnetic hysteresis loss in the sintered samples gradually decreased with increasing sintering temperature due to both the fairly high densification and coarse grain size of the sintered sample.
URI
http://hdl.handle.net/YU.REPOSITORY/26460http://dx.doi.org/10.3365/KJMM.2013.51.2.105
ISSN
1738-8228
Appears in Collections:
중앙도서관 > rims journal
공과대학 > 신소재공학부 > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE