Influence of Post-Annealing on the Oxide Layer of AZ91 Mg Alloy Prepared by Plasma Electrolytic Oxidation

Title
Influence of Post-Annealing on the Oxide Layer of AZ91 Mg Alloy Prepared by Plasma Electrolytic Oxidation
Author(s)
황덕영[황덕영]고영건김용민[김용민]유봉영[유봉영]신동혁[신동혁]
Keywords
MAGNESIUM ALLOYS; CORROSION PROTECTION; ELECTROCHEMICAL-BEHAVIOR; COATINGS; SILICATE; MICROSTRUCTURE; RESISTANCE
Issue Date
201002
Publisher
JAPAN INST METALS
Citation
MATERIALS TRANSACTIONS, v.51, no.2, pp.408 - 412
Abstract
The influence of the post-annealing (PA) treatment on plasma electrolytic oxidation (PEO) treated AZ91 Mg alloy was investigated and the dependence of the dehydration reaction on the PA temperature was also studied. In this study, a series of PA treatments were carried out on the coated samples at four different temperatures, i.e. 373, 423, 473, and 523 K for 10 h. In contrast to the sample without PA treatment, the samples annealed at temperatures higher than 423 K exhibited a significant difference in terms of surface morphology since the MgO content in the oxide layer increased with increasing PA temperature. With increasing PA temperature, the dehydration of Mg(OH)(2) led to the increase in the relative amount of the MgO, which was a hard phase. From the nano-indentation results, the applied loads of the samples were seen to increase as PA temperatures increased. Moreover, the corrosion resistance of the sample annealed at 423 K was higher than that of the samples annealed at three different PA temperatures. [doi:10.2320/matertrans.M2009290]
URI
http://hdl.handle.net/YU.REPOSITORY/22917http://dx.doi.org/10.2320/matertrans.M2009290
ISSN
1345-9678
Appears in Collections:
공과대학 > 신소재공학부 > Articles
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE